The available alternatives out there didn’t seem technically feasible as most D-Link and Linksys offerings are merely Windows Media Center Extenders with “support for MPEG-4/ASP” (read: DivX) but no support for MPEG-4/AVC or MPEG-4/VC1. The option of setting up another HTPC for my home theater wouldn’t be financially viable because at a base price of about $399 I might as well invest in a Blu-Ray burner to watch my backups.

Enter the Western Digital TV Live HD Media Player…

Western Digital TV Live HD Media Player

While scouring the internets looking for solutions to my problem, I stumbled upon the recently released Western Digital Live HD Media Player. The specs fit the bill (and them some) for my technical expectations:

• VIDEO – AVI (Xvid, AVC, MPEG1/2/4), MPG/MPEG, VOB, MKV (h.264, x.264, AVC, MPEG1/2/4, VC-1), TS/TP/M2T (MPEG1/2/4, AVC, VC-1), MP4/MOV (MPEG4, h.264), M2TS, WMV9
• AUDIO – MP3, WAV/PCM/LPCM, WMA, AAC, FLAC, MKA, AIF/AIFF, OGG, Dolby Digital, DTS

Throw in the fact that it supports 1080p over HDMI and is only, it seemed like a no brainer!

The device itself is small. Hilariously small actually. Imagine a small box of 3.5″ floppy disks (if anyone actually remembers those)

Now, my home network setup is unique to my situation. I have two Apple Airport Extreme base stations extending the same network. My NAS is attached to one base station in my office. The Western Digital TV Live HD Media Player is attached to another Apple Airport Extreme base station on my home theater. I knew going into this situation that bandwidth would be an issue as playback of h.264/MKV video is bandwidth intensive and can sometimes require upwards of 50mbps depending on the quality.

My initial testing after hooking up the Western Digital TV Live HD Media Player showed that I was in fact having issues with wireless bandwidth from my Intel SS4200-E NAS to my home theater. The MKV playback of a 1080p MPEG-4/AVC video began stuttering and losing audio/video sync. I started to get disheartened because I thought my Apple Airport Extremes must have been connecting to each other at the highest possible speeds, right? Wrong.

Turns out I had room for improvement in my Wifi setup. I stumbled upon this blog post over on Engadget which talked about the speed differences between Apple’s 2.5Ghz “compatible” N and their 5Ghz modes. I checked my Apple Airport Extremes to see what my network was set at. You can do this by opening up the Airport Utility and selecting your primary base station. Under the wireless tab, you should be able to select your wireless mode.

Setting Apple Airport Extreme Radio Mode

After fiddling around with all the settings, I found that explicitly setting 802.11n with a 5Ghz radio frequency gave me much higher wifi throughput as I had previously running 802.11n in “b/g compatible” mode. The downside of this is not only 802.11n devices that support the 5ghz frequency are able to join my home network, meaning our iPhones are stuck to non-wifi mode while around the house.

Apple Airport Wirelss Setup for Western Digital TV Live HD Media Player

That aside, the Western Digital TV Live HD Media Player was able to play back all of my 1080p HD content without slowdown or playback issues. It would seem from other reviews on forums and across the internet might be having networking issues if they’re having trouble during playback. Granted, I can’t speak for every method of encoding h.264 (between different profiles & containers, it’d be hard to do a comprehensive test), but I can say that my files which I encoded with x264 and saved in an MKV container playback perfectly!

I couldn’t be happier with the Western Digital TV Live HD Media Player and I haven’t had a single issue yet. It’s able to connect to my Intel SS4200-E NAS (both UPNP Media Server and SMB) and browsing files is a sinch. Part of me wishes the interface allowed for more interactive content, such as Media Browser does for Windows Media Center by automatically loading movie information and covers based on the file name. I suppose these features might come at a future time, as Western Digital has just released the first firmware update for the TV Live HD Media Player and they seem to be on track for the next release shortly.

The only drawback I’ve run into thus far is the inability to play WMV files, which I suspect might be a licensing issue… but who knows. It might be coming in a future firmware update as well!

Hope this helps someone out there in the same situation I was in! Please leave any questions you might have and I’ll be more than happy to answer!

Cheers!

Turns out that the MP4 files made by the Samsung NV24HD camera are a of a non-standard H.264/MPEG-4 AVC format. So what’s to do?

Well, if you’re an Apple user (which I assume you are since you’re reading blog entry about iMovie ), then you’re in luck. There’s a tool you can download called ffmpegX which allows you to convert the MP4 files to iMovie compatible MOV MPEG-4 files. In addition, ffmpegx can convert video files to a multitude of formats inlcuding iPod, iPhone and DivX formats. So even if your issue isnt EXACTLY the video files from the Samsung NV24HD camera, ffmpegx is still a great utility to use for video transcoding/covnverting in OSX

Screen Shot of ffmpegX

The only down side I had to doing this was the time it took to convert. It took over two hours to encode a 25 minute movie at 640×480 on my 2.4ghz Macbook Pro. So if you’re planning to use this method, plan to leave your Mac plugged in for a while.

Also, I’ve yet to try newer iMovie ’09 which also just may fix this issue. When I’m able to get my hot little hands on a copy of iLife ’09, I’ll be sure to let everyone know if it works out!

Hope this post is able to help out my fellow Samsung and Apple users out there!

Cheers!